In the world of precision finishing, HVLP (High Volume Low Pressure) technology is king. Graco, the undisputed industry leader, has redefined standards with its Edge II gun series. But when it comes to gearing up, one question consistently arises: what are the real differences between the standard Edge II model and the Edge II Plus version?
This article compares these two high-performance tools to help you maximize your productivity and the quality of your results.
-
- Graco EDGE II spray gun with FlexLiner system – 17P481
-
- Graco EDGE II Plus spray gun with FlexLiner system -17P483
1. The Edge II Gun: Standardized Performance
The Edge II gun is the core tool that comes with many Graco TurboForce turbines. It is designed for professionals seeking reliability and simplicity without compromising on spray quality.
📣 EasyFill Technology: A pressurized cup system that allows you to paint at any angle (even upside down).
📣 Two-Finger Trigger: Offers smooth control and reduces fatigue during long sessions.
📣 Quick-Change Tips: Allows you to switch between products (varnish, lacquer, paint) in seconds.
Graco EDGE II spray gun with FlexLiner system – 17P481
2. The Edge II Plus Gun: Total Control
While the Edge II excels in its simplicity, the Edge II Plus is designed for painters who demand millimetric adjustment of their spray pattern. Its strength lies in the customization options integrated directly onto the gun.
Exclusive Features of the Plus Model:
📣 Independent Air and Material Flow Control: Unlike the standard model, you can adjust air and liquid separately to achieve perfect atomization, regardless of the product’s viscosity.
📣 4-Position Spray Control: A dial located at the rear allows you to change the spray width (from a precise point to a wide fan) in a consistent and repeatable manner.
📣 Advanced Ergonomics: The adjustment knobs are positioned to be manipulated with one hand while working.
-
- Graco EDGE II Plus spray gun with FlexLiner system -17P483
-
- Fluid setting – Edge II Plus spray gun
-
- Air setting – Edge II Plus spray gun
3. Technical Comparison: Edge II vs Edge II Plus
| Features | Edge II (Standard) | Edge II Plus (ProContractor) |
|---|---|---|
| Best Use | Versatile / General Tasks | High-Precision Finishing |
| Adjusting air/material flow | One adjustment setting at the back of the gun for air/material | Two adjustment settings – one for air; and one for material volume. |
| Adjusting fan width | None, no ability to adjust fan width. | Spray fan width can be adjusted at the nozzle. |
| Flow Control | Standard | Independent and Ultra-Precise |
| Cup System | FlexLiner or ProComp Cup | FlexLiner or ProComp Cup |
| Target Audience | Contractors, Carpenters | Master Lacquerers, Luxury Woodworkers |
| Features | Edge II (Standard) gun & Edge II Plus gun |
|---|---|
| Features on both guns | FlexLiner Bag System
A closed system ensuring the cup holding the material is kept airtight. This allows the spray gun to be used upside-down if required. Quick Release Needle A pin situated at the top of the trigger releases the needle Adjustable Air Cap
|
4. Which One Should You Choose for Your Business?
Choose the Edge II if:
You are looking for a robust, efficient, and “ready-to-use” gun. It is the ideal choice for contractors who perform regular painting jobs (doors, baseboards, radiators) where execution speed takes precedence over complex adjustments.
Choose the Edge II Plus if:
Your work demands a showroom-quality finish. If you handle products with varying viscosities (very thin varnishes or denser paints) and need to switch from a wide spray to a narrow one instantly, the extra cost of the Plus version will quickly pay for itself through precision and time savings.
5. Standard vs. ProContractor Series: Which gun goes with which pump?
It is essential to understand that the gun model included depends directly on the configuration of the Graco turbine you choose:
The Standard Range
The EDGE II gun is the standard model supplied with entry-level configurations. It is notably found on the GRACO TurboForce II FinishPro HVLP STANDARD 9.0 – 17P529 pump.
Graco TurboForce II FinishPro HVLP STANDARD 9.0 – 17P529
The ProContractor Range
The EDGE II Plus gun systematically equips the premium versions. It is included with high-performance models such as the GRACO TurboForce II FinishPro HVLP PROCONTRACTOR 7.0 – 17P530 pump or the Graco TurboForce II FinishPro PROCONTRACTOR 9.5 HVLP pump – 17P532.
Conclusion
Whether you opt for the Edge II or the Edge II Plus, you benefit from Graco engineering that minimizes overspray and maximizes paint transfer to the surface. The final choice depends entirely on your need for control: efficient simplicity for one, or micro-precision for the other.
Important: Before removing the spray tip, hold the trigger (keep the trigger pressed) – this pulls the needle back, so that it doesn’t rub against the spray tip – causing damage to the needle.
EDGE II Plus HVLP spray gun in action!
_________________________________________________
Love our content? You can find more here:
Check out our Airless Discounter YouTube channel
Airless Discounter Instagram account
Questions or queries?
For any further questions or if you would like to get your hands on one of these products seen in this article, you can contact us on +49 (0) 30 220 15436, fill out our contact form or email us. If you wish to purchase one of the products mentioned above, you can check them out in our online store. You can also visit us at our service base during office hours.
