Instruction of a Graco LineLazer V 200 HS for the temporary marking of building sites in Rostock. The customer is active in the field of worksite safety. The Graco LineLazer V 200 HS is to be used mainly for the yellow marking of construction sections on national roads and motorways. In the following blog post, we’ll give you an overview of how the Graco LineLazer V 200 HS is used at the customer’s site, the training involved and other information about the marking device’s equipment.
Initiation and test with the Graco LineLazer V 200 HS
Introduction to the Graco LineLazer V 200 HS
The training took place on site at the customer’s branch in Rostock, and was given to three employees over the course of one day. The focus was on the commissioning, operation, cleaning and maintenance of the marking equipment. In addition to the correct setting of the spray width and paint quantity, this also involved controlling the pneumatic application of beads.
Instructions for the Graco bead-marking machine
Application of the Graco LineLazer V 200 HS
Our customer has purchased the Graco LineLazer V 200 HS for spraying temporary 1K yellow markings on national road and motorway construction sites. The marking machine can also be used to mark car parks. In addition to the pneumatic application of beads, a special feature of the V 200 HS is that it can be fitted with two spray guns to mark double lines, hard shoulder strips or pedestrian crossings up to 50 cm wide.
Spraying with the Graco LineLazer V 200 HS
As well as automating the lines, the customer wanted an important equipment feature: pressurised spraying. In contrast to gravitational bead sprinkling, here the glass beads are deposited on the wet marking paint using compressed air.
In the field, customers will use the Graco LineLazer V 200 HS with an existing LineDriver to mark larger sections economically.
Graco LineDriver ES
What marking paint is used?
K833 and K835 paints are mainly used for temporary marking on building sites. For marking car parks, the Graco LineLazer V 200 HS is used with K809 marking paint. For markings with a line width of 12 cm, the marking device has been fitted with a Graco LL 319 nozzle. For wider markings of 15 cm on motorways, a 321 nozzle is used.
Graco RAC V LineLazer
__________________________________________________
Love our content? You can find more here:
Check out our Airless Discounter YouTube channel
Airless Discounter Instagram account
Questions or queries?
For any further questions or if you would like to get your hands on one of these products seen in this article, you can contact us on +49 (0) 30 220 15436, fill out our contact form or email us. If you wish to purchase one of the products mentioned above, you can check them out in our online store. You can also visit us at our service base during office hours.
