You know how to mask. The method, the order of operations, removing the tape at the right moment: you do all of this every day. The question that remains open is the one that comes up when you place an order — is this roll as good as the one you have been using for ten years, and how many will you need for next week’s job?
This article answers those two questions. If you are looking for the step-by-step application method instead, we have covered it in detail in our guide how to protect surrounding surfaces when using an airless sprayer.
The three questions that tell you whether a tape holds
Whether a masking tape is any good is not something you read on a data sheet. You find out at the exact moment you remove it. Three questions are enough, and each one tells you about a different property of the product.

A tape is judged on removal, not by touch.
Does the edge stay sharp?
Thickness test
The thicker the tape, the bigger the step it creates for paint to build up against, and the more ragged the edge when you remove it. A thin tape pressed down properly leaves a clean line; a thick tape leaves a ridge you will have to touch up.
Has paint bled underneath?
Test of real adhesion on your substrate
Be aware: this point separates tapes far more harshly with airless than with a roller. At 200 bar, paint is not laid down, it is projected — a tape that would pass muster with a brush can let material through on the very first pass of the gun.
Does the roll tear cleanly or in shreds?
Fibre reinforcement test
This is as much about productivity as about quality. A tape that tears off at an angle every time costs a few seconds per length — multiplied by the number of lengths in a full day of masking.
A note on method
Test on the actual substrate of the job
These three questions only make sense with your own paint and your own working pressure. Rubbing a piece of tape between your fingers will tell you nothing.
Decoding the microns: 90, 150 and 175 µm
Thicknesses appear on every product sheet, and almost nobody looks at them. That is a shame, because they tell you exactly what each tape is for. The counter-intuitive point: on a masking tape, thinner does not mean more fragile — it means more precise.
| Product | Thickness | What the thickness delivers |
|---|---|---|
| Gold tape (washi) | 90 µm | Thinness in the service of the edge. Impregnated, fibre-reinforced rice paper: thin enough not to create a step, strong enough not to tear. |
| Armoured tape #27 | 150 µm | Thickness in the service of hold. Strong adhesion, tears straight by hand. Here the aim is not a clean line but a secure fixing. |
| PE render tape | 175 µm | Thickness in the service of sealing and flexibility. Smooth polyethylene, waterproof, tears by hand. |
| Masking film | 10 µm | Here it is the film that is measured, not the adhesive strip. Light enough to lie flat, strong enough not to puncture. |
In other words: three figures, three opposing logics. Choosing “the thickest” as a precaution is a mistake if what you are after is a clean dividing line with no adhesive residue.
Which width for which use?
Gold tape comes in several widths, and a common reflex is to order just one to keep stock simple. It is a false economy: too wide on a narrow profile and you waste tape; too narrow on a large joint and you go over it twice.
We actually offer five widths: 19, 25, 30, 38 and 50 mm. Details of each, with the price per metre, can be found in our article Which masking tape should you choose?
How many rolls for one room?
Nobody really thinks about this question in advance. You ask it at the end of the day, when you are a roll short. Let us take an order of magnitude for a typical room: 4 × 3 m, with a 2.50 m ceiling, one door and one window.
- Skirting boards: 14 m perimeter, minus the door opening
- Door frame: approx. 5 m
- Window surround: approx. 5 m depending on the frame
- Sockets and switches: 1 to 2 m in total
A 50 m roll therefore covers roughly one and a half rooms — provided you do not have to redo a botched line. As for film, a 0.55 m x 33 m roll easily covers the window, the door and a radiator.
This calculation explains the make-up of the pack presented below: nine rolls, two of them in 30 mm precisely because that is the width that runs out first. It is the volume needed to do a complete room, with some margin — not a token assortment.
Testing a product without committing a budget
That leaves the practical problem: to apply the three questions from the start, you need to have the product in hand and have used it on a real job. And nobody wants to order a full carton of a product they have never used.
That is exactly why we have put together a testing pack of our best-selling tapes and masking materials. Nine rolls, one carton — designed for those who mostly buy equipment from us, or who do not know us yet and simply want to see how our materials perform on their job.

Nine rolls from our tape and masking range in a single carton.
An important point
These are not scaled-down samples
Each roll is a full sales unit from our standard range — 50 metres of tape per roll, 33 metres of film. You can genuinely work with them, not just judge a scrap between your fingers.
What the testing pack contains
| Qty | Item | Dimensions |
|---|---|---|
| 1 | Gold tape | 19 mm x 50 m |
| 2 | Gold tape | 30 mm x 50 m |
| 1 | Gold tape | 50 mm x 50 m |
| 1 | Armoured tape #27 | 50 mm x 50 m |
| 1 | PE render tape | 48 mm x 50 m |
| 1 | Masking paper with Gold tape | 18 cm x 20 m |
| 1 | Masking film with Gold tape | 0.55 m x 33 m |
| 1 | Masking film with Gold tape | 1.40 m x 33 m |
The complete set is available for €21.29 excl. VAT (ref. 9078509), which is the price of the nine units bought separately. Whatever you settle on, you can then reorder by the unit or by the carton.

The testing pack: nine rolls ready to try on your next job.
Discover the pack in our shop All Gold tapes All masking materials
Once you have tried it, let us know what you think. Feedback from the field is our best guide to which widths and formats we still need to add to the range.
Further reading
Here are more tips on airless spray technology

Do you have questions?
Contact us via our contact form.
Prefer to reach us directly? Call +49 30 22015436, message us on WhatsApp, or email info@airless-discounter.de.